Call for a fast, free quote: 619-990-8186
Home / Well water dual-tank system
Whole-home system · Well water · San Diego & Riverside Counties

Dual-Tank Well Water System

Built for private wells. A softening tank handles hardness while a Katalox Light tank targets iron, manganese, and the rotten-egg smell of hydrogen sulfide.

Iron & manganese removalHydrogen sulfide odorTwo smart valvesLifetime tank warranty
Cutaway of the Val Water Co dual-tank well water system

Well water needs a different approach

Private well water often carries more than hardness: iron that stains fixtures, manganese, sediment, and hydrogen sulfide that smells like rotten eggs. This system pairs a softener with a dedicated Katalox Light tank, so each problem gets the right treatment.

28 GPMvalve flow rate
27 GPMservice flow (15 PSI drop)
2 valvesone per tank
15" × 35"brine tank
✓

Targets iron and manganese

Katalox Light media is designed to reduce iron and manganese that cause orange and black staining.

✓

Reduces rotten-egg odor

The second tank also addresses hydrogen sulfide, the source of the sulfur smell.

✓

Softens hard water

A softening tank removes calcium and magnesium so scale stops building up on fixtures and in your water heater.

✓

Sediment, chlorine, and taste

A coconut shell carbon layer on top of the second tank helps with sediment, chlorine, and taste and odor compounds.

✓

Two smart valves

Each tank has its own programmable ceramic-disc valve with a 72-hour memory backup.

✓

Lifetime tank warranty

Plus coverage on the valves and electronics, and a labor warranty on the install.

What is in the system

Three vessels, each with a job.

Tank 1

Softening tank

Cation resin removes hardness minerals.

Tank 2

Katalox Light tank

Katalox Light media with a coconut shell carbon layer targets iron, manganese, hydrogen sulfide, sediment, and chlorine.

Tank 3

Brine tank

A 15" × 35" square tank holds the salt used to recharge the resin.

Test first

No single system fits every well. Iron, manganese, hydrogen sulfide, and sediment levels vary a lot from property to property, so we review your water before we recommend a setup. Call us at 619-990-8186 and we will talk through what your well needs.

Specifications

ConfigurationSoftening tank + Katalox Light tank + brine tank
ValvesTwo ceramic-disc valves, one per tank, with 72-hour memory backup
Valve flow rate28 GPM
Service flow27 GPM at a 15 PSI pressure drop
Backwash flow3.0 GPM
Brine tank15" × 35" square
Bypass valve1" full-flow, included
RegenerationUpflow counter-current, demand-initiated metering
Operating pressure30 – 125 PSI
Water temperature40 – 110°F
Power120V / 60Hz with a 12V 650mA transformer
Inlet turbidityUnder 5 FTU

Manufacturer ratings. Actual performance depends on your plumbing, water pressure, and water quality.

Add drinking-water purity

For the cleanest drinking and cooking water, add an under-sink reverse osmosis system at the kitchen sink.

From quote to install

  1. Request a quote. Use the form or call 619-990-8186. Tell us about your home and what you notice in your water.
  2. Get a flat written quote. One clear number for the system your home needs. No pressure, no surprises.
  3. Choose how to pay. Pay up front, or use monthly financing. Checking options takes about 3 to 5 minutes with a soft credit check that will not affect your score.
  4. Installation. Licensed, insured installers. Floors protected, area left spotless.
  5. We stand behind it. Lifetime tank warranty, and we service what we install.

Frequently asked questions

What does this system treat?
Hardness, iron, manganese, hydrogen sulfide (rotten-egg smell), sediment, chlorine, and taste and odor compounds, using a softening tank and a Katalox Light tank.
Do I need to test my well water first?
Yes. Every well is different, and we review your water so the system fits the actual levels of iron, manganese, and sulfur.
Will it make the rotten-egg smell go away?
The Katalox Light tank is designed to reduce hydrogen sulfide odor. We will confirm what to expect for your well when we review your water.
Does it need salt?
Yes. The softening tank uses brine, so the salt tank needs refilling from time to time.
What are the water requirements?
The system operates at 30 to 125 PSI and 40 to 110°F, with inlet turbidity under 5 FTU. A sediment filter can be added if your well has more.
How long does installation take?
Installs typically take a few hours. Rural properties may need extra time for plumbing or distance. We will discuss it in your quote.
How much does it cost?
We give a flat written quote with no surprises. Financing is available and checking your options takes about 3 to 5 minutes with a soft credit check.

Ready for better water at home?

Tell us about your home and we will send a flat written quote for the right system. Financing is available.

Get my quote Call 619-990-8186

We install across San Diego, Orange, and Riverside counties, including San Diego, Chula Vista, Carlsbad, Oceanside, Escondido, Irvine, Newport Beach, Temecula, and Murrieta. Do not see your city? Call us.

Explore our other systems